Latest News
OTC 2017- Next 1 -4 May, we will attend the Offshore Technology Conference show in Houston (TX): you are invited to visit us at booth #4047 (NRG center - HALL entrance A-B).
NEW TEST BENCH FOR TENSIONER PAD TESTING
see the new section of the website
PAST NEWS
150mT VLS -ready for Testing
Click on below link to read the related newletter.
NEW TEST BENCH FOR TENSIONER PAD TESTING
see the new section of the website
PAST NEWS
150mT VLS -ready for Testing
Click on below link to read the related newletter.
| newsletter-may_2016.pdf |
WORKSHOP - QUAY SIDE AT GENOA
REMACUT has opened a new workshop at quay side to delivery equipment and system directly at quay side.
Click on below link to read the related newletter.
| Newletter March |
LATEST PROJECTS 2015-2017
March 2017
REMACUT have been awarded by Saipem S.p.A for the supply of SUBSEA REPAIR STRUCTURES and TOOLS.
April 2016
REMACUT have been awarded by Saipem Offshore Norway S.A an order for FIRING LINE SMART ROLLERS: composed by (5) Innovative roller and related control system to replace the existing tracks on board of CASTORONE. These rollers are provided with Up-Down motion for setting the BOP, active vertical motion, passive damping, supporting and idle conveying of the pipeline, AR wire rope support. Pipe range 8"-60", Max vertical emergency load 1500 kN.
March 2016
REMACUT have been awarded by Saipem S.p.A an order for a portable WELL INTERVENTION UMBILICAL SYSTEM: composed by 10T Umbilical Winch, HPU unit and over-boarding chute according to DNV 2.7-3 Standard for Certification of Portable Offshore Units
January 2016
REMACUT have been awarded by N.P.C.C an order for various size ILUC (internal line up clamps) to be used for SJ and DJ fabrication at S-Lay.
September 2015
REMACUT have been awarded by McDermott Inc an order for the supply of one 400T REEL DRIVE SYSTEM (RDS).
RDS system is composed by 1 off movable/adjustable under load RDS, rails equipped transversal jacking system, DNV 2.7-1 certified EPU and HPU shelters
July 2015
REMACUT have been awarded by McDermott Inc an order for the supply of one 150T VERTICAL LAY SYSTEM (VLS).
This VLS is composed by 2 x 75T - 4 Track tensioners, Extendable Working Platform, HOC clamp/Tulip Bellmouth, Initiation Sheave, 2x20T SWL Hoists, Centralizer/wire guide, A/R system, Top aligner, Effer Cranes support, Lighting system, DNV 2.7-1 certified EPU and HPU shelters
March 2015
REMACUT have been awarded by SAIPEM CONTRACTING NETHERLAND an order for New Main Crane 90T AHC WINCH c/w Active Heave Compensator with DNV 2.7-1 certified EPU and HPU shelters.
February 2015
REMACUT have been awarded by AIRBORNE Oil&GAS an order for one 22T - 4 TRACKPIPE TENSIONER c/w HPU and skid system.
March 2017
REMACUT have been awarded by Saipem S.p.A for the supply of SUBSEA REPAIR STRUCTURES and TOOLS.
April 2016
REMACUT have been awarded by Saipem Offshore Norway S.A an order for FIRING LINE SMART ROLLERS: composed by (5) Innovative roller and related control system to replace the existing tracks on board of CASTORONE. These rollers are provided with Up-Down motion for setting the BOP, active vertical motion, passive damping, supporting and idle conveying of the pipeline, AR wire rope support. Pipe range 8"-60", Max vertical emergency load 1500 kN.
March 2016
REMACUT have been awarded by Saipem S.p.A an order for a portable WELL INTERVENTION UMBILICAL SYSTEM: composed by 10T Umbilical Winch, HPU unit and over-boarding chute according to DNV 2.7-3 Standard for Certification of Portable Offshore Units
January 2016
REMACUT have been awarded by N.P.C.C an order for various size ILUC (internal line up clamps) to be used for SJ and DJ fabrication at S-Lay.
September 2015
REMACUT have been awarded by McDermott Inc an order for the supply of one 400T REEL DRIVE SYSTEM (RDS).
RDS system is composed by 1 off movable/adjustable under load RDS, rails equipped transversal jacking system, DNV 2.7-1 certified EPU and HPU shelters
July 2015
REMACUT have been awarded by McDermott Inc an order for the supply of one 150T VERTICAL LAY SYSTEM (VLS).
This VLS is composed by 2 x 75T - 4 Track tensioners, Extendable Working Platform, HOC clamp/Tulip Bellmouth, Initiation Sheave, 2x20T SWL Hoists, Centralizer/wire guide, A/R system, Top aligner, Effer Cranes support, Lighting system, DNV 2.7-1 certified EPU and HPU shelters
March 2015
REMACUT have been awarded by SAIPEM CONTRACTING NETHERLAND an order for New Main Crane 90T AHC WINCH c/w Active Heave Compensator with DNV 2.7-1 certified EPU and HPU shelters.
February 2015
REMACUT have been awarded by AIRBORNE Oil&GAS an order for one 22T - 4 TRACKPIPE TENSIONER c/w HPU and skid system.
EXHIBITIONS 2017
OTC 2017 (1 May - 4 May) - HOUSTON (TX) USA
Remacut will attends the OTC2017 show in Houston (TX): you are kindly invited to visit us at booth #4047 (NRG center - HALL entrance A-B).
OTC 2017 (1 May - 4 May) - HOUSTON (TX) USA
Remacut will attends the OTC2017 show in Houston (TX): you are kindly invited to visit us at booth #4047 (NRG center - HALL entrance A-B).
